http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 1 o this data sheet is applied for chip emifil r used for automotive electronics equipment for your design. 2009.5.1 noise suppression products/emi suppression filters > for automotive > emifil r (capacitor type) for automotive 2.6 0.3 6.8 0.7 0.2 0.7 0.2 1.6 0.3 1.6 0.3 (in mm) +0.3 -0.5 (1) (2) (3) 0 10 20 30 40 50 60 0.1 1 10 100 1000 frequency (mhz) insertion loss (db) (50 ? - 50 ? ) nfe61ht330u2a9 nfe61ht680r2a9 nfe61ht101z2a9 nfe61ht332z2a9 nfe61ht102f2a9 nfe61ht681d2a9 nfe61ht361c2a9 nfe61ht181c2a9 input output gnd no polarity. (1) (3) (2) for automotive emifil r (capacitor type) for automotive nfe61h series (2606 size) dimensions insertion loss characteristics (main items) equivalent circuit packaging code packaging minimum quantity l 180mm embossed tape 2500 k 330mm embossed tape 8000 b bulk(bag) 500 rated value ( p : packaging code) part number capacitance rated current rated voltage insulation resistance (min.) operating temperature range nfe61ht330u2a9 p 33pf+30%-30% 2a 100vdc 1000m ohm -55 c to +125 c nfe61ht680r2a9 p 68pf+30%-30% 2a 100vdc 1000m ohm -55 c to +125 c nfe61ht101z2a9 p 100pf+30%-30% 2a 100vdc 1000m ohm -55 c to +125 c nfe61ht181c2a9 p 180pf+30%-30% 2a 100vdc 1000m ohm -55 c to +125 c nfe61ht361c2a9 p 360pf+20%-20% 2a 100vdc 1000m ohm -55 c to +125 c nfe61ht681d2a9 p 680pf+30%-30% 2a 100vdc 1000m ohm -55 c to +125 c nfe61ht102f2a9 p 1000pf+80%-20% 2a 100vdc 1000m ohm -55 c to +125 c nfe61ht332z2a9 p 3300pf+80%-20% 2a 100vdc 1000m ohm -55 c to +125 c number of circuit: 1 continued on the following page.
continued from the preceding page. http://www.murata.com/ data sheet ! note: 1. this datasheet is downloaded from the website of murata manufacturing co., ltd. therefore, it?s specifications are subject t o change or our products in it may be discontinued without advance notice. please check with our sales representatives or product engineers bef ore ordering. 2. this datasheet has only typical specifications because there is no space for detailed specifications. therefore, please appr ove our product specifications or transact the approval sheet for product specifications before ordering. 2 o this data sheet is applied for chip emifil r used for automotive electronics equipment for your design. 2009.5.1 noise suppression products/emi suppression filters > for automotive > emifil r (capacitor type) for automotive ! caution (rating) 1. do not use products beyond the rated current and rated voltage as this may create excessive heat and deteriorate the insulation resistance. 2. be sure to provide an appropriate fail-safe function on your product to prevent a second damage that may be caused by the abnormal function or the failure our product. notice solderability of tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the tin melting point is used. please confirm the solderability of tin plating termination chip before use. ! caution/notice
|
